Steelco Metal And Alloys

Titanium Grade 5 Round Bar is made up of a titanium alloy that has aluminum and vanadium as additions in the composition. The material has very high corrosion resistance properties and this is the most used grade of titanium alloys.

Titanium Grade 7 is an unalloyed titanium grade which have standard oxygen content and addition of palladium. This grade is divided by excellent corrosion resistance in reducing and oxidizing environments and is y used within chemical industries. Titanium Grade 7 is most widely used in chemical plants.

Grade 12 TitaniumThis material is very corrosion resistant in highly oxidizing and mildly reducing environments. Grade 12 Titanium (UNS R53400) is readily weldable, and has superior crevice corrosion resistance. This material is very corrosion resistant in highly oxidizing and mildly reducing environments.

Titanium Gr 1 is a titanium alloy that contains a mixture of titanium and other chemical elements. Titanium Gr 1 alloy offers very high tensile strength and toughness in extreme temperature conditions. They offer excellent corrosion resistance and they are usually light in weight.

Titanium Grade 2 Round Bar is made up of a commercially pure titanium grade with over 99% titanium in it. The material comes under the specification ASTM B348 and the dimensions are according to the standards EN, DIN, JIS, ASTM, BS, ASME and AISI.

The Hastelloy C2000 round Bars offer superior defense against pressure corrosion cracking in the presence of chloride-containing solutions. Here, the nickel from the Hastelloy makes these products formable and durable. However, chromium enhances the resistance to withstand in solutions containing oxidizing elements.

Hastelloy C22 Bar With a high chromium content, hastelloy c22 round bar offers outstanding resistance to oxidizing and reducing acids, making it highly suitable for applications where corrosion resistance is paramount.

Hastelloy X Bar ApplicationsBecasue Hastelloy X bar is strong and resistant to oxidation as well as extremely resistant to stress and corrosion cracking in petro-chemical applications, Alloy X is used for various applications within the aerospace, manufacturing, naterual gas, and oil refining industries.

Hastelloy B3 Bar is molybdenum-nickel alloy which provides brilliant resistant to various acids at any temperature. The bar consists of high material components chosen by the company to ensure the quality of production for their customers.

Round bar Hastelloy B2 Because of effectiveness in the production of the bars various good properties are found in this Hastelloy B2 bar. The properties are high tensile strength, good dimensional accuracy, good surface finishes, durability, flexibility, sturdiness and withstanding in heavy loads and high-temperature atmosphere.

The Inconel 600 Round Bar has 72% nickel, 14% chromium, iron, carbon, manganese, sulfur, silicon and copper in the composition. The material has high melting point of 1413 degrees Celsius. The ASTM B166 UNS N06600 Bar has 310MPa minimum yield strength and 655MPa minimum tensile strength.

Inconel 625 round bars are oxidation and corrosion resistant materials that are a perfect fit for serving in extreme environments, depending on the heat and pressure. When being heated, round bars form a thick and stable oxide layer, protecting the surface from attack.

Incoloy 825 is a nickel-iron- chromium alloy with titanium, copper, and molybdenum. Incoloy 825's chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, intergranular corrosion, and stress- corrosion cracking.

Inconel 617 is a nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength, and oxidation resistance at high temperatures. Resistance to oxidation is enhanced by an aluminum addition. The alloy also resists a wide range of corrosive aqueous environments.

Nickel 200 Round Bars are often termed as non-ferrous metals by means of having features superior strength and toughness, superior temperature, superior electrical conductivity and superlative corrosion resistance.

Cu-Ni 70 / 30 Round Bars (UNS C71500) are used in chemical processing, cooling plant and heat exchanger, evaporator tubes, refrigerator, condenser components and distiller tubes. Temperatures between 927 and 1038 Degree C (1700 Degree F and 1900 Degree F) are suitable for Cupro Nickel 70 / 30 Rods.

The stainless S31803 Duplex Spring Steel Bar microstructure is composed of austenite pools enclosed by a continuous ferrite phase. Alloy grade 2205 Duplex Stainless Steel Round Bar was designed to solve typical corrosion issues with austenitic grade 300 series stainless steels.The duplex 2205 (UNS S31803/32205) grade is the most frequently used duplex grade. The grade generally has a higher corrosion resistance compared to the austenite steels. The grade also has a yield strength, double that of conventional austenitic stainless steels.

The manufacturing process of this item includes- selection and testing of the raw material, manufacturing following industry standards, testing, inspection, and documentation finally packing the produced material. The tests which are performed on these bars ensure that it meets the industrial standards. So what all tests are performed on this product? The tests are Eddy current examining, Firmness test, Impact analysis, and Large-scale test and Elongation tests. The other tests are Positive material test, Radiography test, Hardness test, Tensile test and IGC test.

After the testing is completed these bars are presented in front of the third party. This third party is inspecting the material very carefully and making sure that the product which is manufactured meets the industrial needs. Only inspected material is packed and delivered. Without inspection, manufacturers cannot pass the product for packaging and delivery. Inspection once completed the product documentation is done and a documentary is made on the product. Finally, the product is packed and delivered.

904L Stainless Steel Round Bar is a high-combination austenitic stainless steel with low carbon content. The evaluation is expected for use under extreme destructive conditions. It has been application demonstrated over numerous years and was initially created to oppose erosion in weaken sulfuric corrosive.

15-5 PH stainless steel is a martensitic precipitation-hardening stainless steel with approximately 15% Chromium and 5% Nickel. It has high strength, high hardness, and excellent corrosion resistance. Strength can be further increased by a single low temperature heat treatment.

Steelco Metal And Alloys is one of the most outstanding exporter, manufacturers and suppliers of Nitronic Composite 50/XM19 Round Bars in India. Nitronic Alloy 50 Bars (Nitronic 50 Round Bars/XM19 Bars) offers a party of decay impediment and power not tracked down in some other business material open in its expense range.

Nitronic Alloy 50 / XM-19 Bright Bar, Nitronic Alloy 50 Flat Bar Exporter, Alloy 50 Cold Finished Bars Suppliers in India.

Nickel 200/201 is a commercially pure nickel alloy that exhibits excellent chemical and mechanical properties, making it highly sought after for many applications. It offers good resistance to corrosion and high temperature environments, is easy to fabricate, weld and form with no post-weld heat treatment required.

Inconel 800 round bar is an alloy consisting of iron, nickel, and chromium. This Inconel 800H hot finish round bar has a moderate tensile strength and reasonable tolerance to oxidation and carburization at high temperatures. Hardened and tempered. Precipitation hardened.

Steelco Metal And Alloys is one of the most brilliant exporter, manufacturers and suppliers of Nitronic Mix 60 Round Bars in India. The oxidation obstruction of Nitronic Alloy 60 Round Bar (Nitronic 60 Bars) is apparently Stainless Steel 309 Grade, and far higher to Stainless Steel 304 Grade. This grade is best seen for its wear and irritating check

Meanwhile, the enhancements of Manganese and Silicon have given these Nitronic 60 Round Bars (Nitronic 60 Bars) as an association to oblige wear, bothering, and pushing even in the tempered condition. Overall called UNS S21800 Round Bars, our Nitronic Alloy 60 Bars are open to our huge clients in different level of widths, wall thicknesses and sizes in changed structure what's more at truly sensible rates.

Inconel 718 is a nickel-chromium alloy that contains supplemental amounts of columbium, iron, molybdenum, aluminum, and titanium. It is also known as nickel alloy 718. Given this alloy's durability and ductility characteristics, it has a wide range of applications in a broad spectrum of industries.

Hastelloy C276 is a corrosion-resistant nickel-molybdenum-chromium alloy that is suitable for use in severe chemical and high-temperature environments. The alloy is widely used in a variety of industries, including chemical processing, power generation, and oil and gas production.

Inconel 800 round bar is an alloy consisting of iron, nickel, and chromium. This Inconel 800H hot finish round bar has a moderate tensile strength and reasonable tolerance to oxidation and carburization at high temperatures. Hardened and tempered. Precipitation hardened.

17-4 is a chromium-nickel-copper precipitation hardening stainless steel used for applications requiring high strength and moderate level of corrosion resistance.

A286 is an austenitic, non-magnetic, iron-base super-alloy in its annealed condition. It is used in applications that require corrosion resistance and high strength up to 1300 degrees F. It is also useful for lower stress applications at higher temps.

Beryllium Copper Round Bar 172 is used for aerospace, industrial, machining, military, and tooling applications. 172 is a non-magnetic, non-sparking, strong, hard, wear resistant, conductive metal. These attributes make it ideal for use in critical environments where sparks can be deadly.

The name of a Copper Nickel 90/10 Round Bar is a derivative of the chemical composition in its alloy. Which in this case indicates that the content of copper in the alloy stands at around 90%, with the content of nickel weighing in about 10% of the total weight of the DIN 2.0872 Square bar.

MONEL K500 is a age hardened alloy, whose basic composition makeup consists of elements like Nickel & Copper. Which combines the corrosion resistance of Alloy 400 with the high strength , fatigue resistance and erosion resistance.

Monel 400 Monel 400 Round BarMonel 400 or Alloy 400 (UNS N04400) is a nickel-copper alloy with superior corrosion resistance, moderate/high strength and good weldability.

Zeron 100 Round Bar is a super duplex , highly alloyed grade of stainless steel. This stainless steel grade has been designed for use in aggressive environments. The ferritic structure and alloy additions in the Zeron 100, is known to enhance the mechanical properties of the metal.

UNS S32750 or super duplex stainless steel 32750/32760 is a fusion of austenite and ferrite in an equal proportion which improves the strength of ferritic and austenitic steel grades. With a higher content of molybdenum and chromium, super duplex gets better corrosion resistance than standard duplex grades.

This alloy, because of its excellent hardness, exhibits exceptional wear, scratch and abrasion resistance at ambient and elevated temperatures. The exceptional wear properties chartered by this material are inherently unique and are associated with the dispersion of complex carbide phases within the CoCr alloy matrix.

The metal is silvery looking and has very high melting point. The melting point of UNS R60705 Zirconium Round Bar is 1852 degrees Celsius. The high temperature resistance and the high corrosion resistance is used in crucibles, ceramics, abrasives and in bricks production.

Hastelloy C4 Bars has exceptional resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, chlorine, hot contaminated solutions (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions.